Follett - Ice Pro - Automatic Ice Bagging & Dispensing System

An ice storage bin with automatic agitation to store and dispense cube or nugget ice into bags, carts, pails or totes. Exceptional labour saving, sanitation and safety for food service operators. Up to 454kg storage capacity.

Labour Saving ice removal:
• Eliminates the need to shovel or scoop ice from bin.
• Automatic agitation cycle prevents ice from forming bridges - two agitator bars keep ice loose and free flowing.
• Foot pedal and push- button actuation standard with a dispense rate of up to 55kg per minute.

Ice dispensed into most carts and containers:
• Adjustable bag stand accommodates bag sizes up to 10kg.
• Standard dispense chute compatible with carts to 750mm high.
• Dispenses ice into smaller containers such as Totes or eskies.

Easy to clean, easy to use:
• Dispensing and agitating components easily removed for cleaning.
• Removable, lockable clear window prevents unauthorised access to ice; provides for ice removal in power failures & for maintenance.
• Maintenance access from the front and side.
• Front assembly removes for installation through narrow doors.

Semi-Automatic bagging DB 1000SA:
• User friendly controls with mode selection and variable dispense time.
• Blower puffs bags open automatically for high volume, hands free dispensing.
• Bag holder pins for use with wire wicket bags; pins adjust for bags 153mm to 254mm on centre.
• Dispense timer for consistent filling of bags.
• 5kg bags can be filled by one person at a rate of 6-8 per minute.

DB 1000 SA
454kg storage automatic bagger.

Dimensions
1283mm wide x 1823mm high x 1156mm deep

Standard Electrical
50Hz
Required Circuit - 240V, 1 ph, 15 amps
Wire in accordance with all local codes.

Specification Sheet
Click Here

Service Manual
Click Here

Video
Click Here

Recommended Retail Price (RRP ex gst)
Contact Coast Distributors here

Model Number	Cu. Vol. (cu ft/m)	Max. Bin Cap. lb (Kg)2	Width (mm)	Depth (mm)	Height (mm)	Required Door Access (mm)	Approx. ship Wt. 2(lb/kg)
DB1000SA	33.3 (.94)	1000 (454)	50.5 (1283)	45.5 (1156)	71.75 (1823)	34.25 (870)	728 (330)

Specifications
Automatic ice storage and dispensing system to be Follett (DB1000SA) with elevated bin and base. Bin to hold up to 454kg of ice. Dispense rate to be approximately 55kg/min. Tow-position ice discharge chute with selector lever allows filling of bags or other containers. Lockable clear inspection window shall have interlock switch to prevent operation of window is removed. Hopper to be constructed of double wall rotationally molded polyethylene insulated with non-CFC polyurethane foam. Storage hopper shall be supported by stainless steel frame. Heavy-duty agitation system includes two stainless steel agitators and 1/2 HP motor. Dispense auger to be rotationally molded plastic auger driven by 1/4 HP motor. Front assembly removes for installation through narrow doors. Activation of the dispensing function shall be controlled by push-button and foot pedal. Dispenser to be NSF, UL and cUL listed.

DB1000-SA only: Dispenser shall be equipped with blower function for automatically opening ice bags, timed dispense and holding pins for bags.

Diagram Notes:
1. Computed on cubic volume of bin. Does not reflect voids that can occur due to pyramiding.
2. Add 2” (51mm) to depth and 10 lbs (4.5kg) to shipping weight when reinforced top and drain pan assembly accessory is used.
3. Dispense assembly removes if necessary for installation access through 36” (915mm) door opening
4. Special top required for icemakers weighing more than 800 lbs (363kg). Add 2.125” (54mm) to height. Contact factory.

* Diagram: Patent pending: Follett recommends installation of a floor drain and a floor grate with all ice storage bins.